Author Topic: Open Source Laser Tag project - ARMada  (Read 48623 times)

Pingvin

  • Developer
  • Veteran
  • ***
  • Posts: 454
    • View Profile
Re: Open Source Laser Tag project - ARMada
« Reply #360 on: May 04, 2018, 12:07:04 AM »
"Matryoshka" works with the "Ascetic".
https://youtu.be/8RLN4_1Ghfw

"Matryoshka" is now universal - and with "Ascet" can work, and with "ARMada" without changing the firmware.

Source
https://yadi.sk/d/c3Y58Toq3VJuFD

Bin
https://yadi.sk/d/0CM0HOMQ3VJuHU



"Manually" bluetooth modules do not need to be configured!
Neither on the "Matryoshka", nor on the "Ascetic".

And do not forget to put the jumper on the P3 connector between the first and second legs - otherwise nothing will work!
« Last Edit: May 04, 2018, 01:58:31 AM by Pingvin »

Pingvin

  • Developer
  • Veteran
  • ***
  • Posts: 454
    • View Profile
Re: Open Source Laser Tag project - ARMada
« Reply #361 on: May 04, 2018, 04:48:28 AM »
"Ascetic" and "Armada" alternately work with a bandage on the basis of the Matryoshka board.

https://www.youtube.com/watch?v=7X0ytVeer7k&feature=youtu.be

Pingvin

  • Developer
  • Veteran
  • ***
  • Posts: 454
    • View Profile
Re: Open Source Laser Tag project - ARMada
« Reply #362 on: May 22, 2018, 06:01:42 AM »
Rhino case and ARMada inside.
https://www.youtube.com/watch?v=-BoHT1J3Mvs




Pingvin

  • Developer
  • Veteran
  • ***
  • Posts: 454
    • View Profile
Re: Open Source Laser Tag project - ARMada
« Reply #363 on: July 13, 2018, 03:35:38 AM »
Barnaul




« Last Edit: July 13, 2018, 03:37:52 AM by Pingvin »

Pingvin

  • Developer
  • Veteran
  • ***
  • Posts: 454
    • View Profile
Re: Open Source Laser Tag project - ARMada
« Reply #364 on: July 13, 2018, 03:40:47 AM »
It's not my tagger.
ARMada inside.


« Last Edit: July 13, 2018, 03:42:24 AM by Pingvin »

zombiehunter

  • Full Member
  • **
  • Posts: 140
    • View Profile
    • Email
Re: Open Source Laser Tag project - ARMada
« Reply #365 on: July 24, 2018, 08:12:25 PM »
Very Very Awesome! Wish could find something like this